Our classic, 100% acrylic, exterior velvet paint for wood siding, shakes, stucco and masonry or
properly primed metal. Excellent color retention and coverage. Kril is the classic quality the Northwest has relied in
for over 50 years. Kril is available in Flat, Satin and Semigloss as well.
|
|
|
| Color: |
Full range |
|
| Finish: |
Velvet |
|
| Density: |
10.7# per gallon |
|
| Clean-Up: |
Mild soap and water |
|
| VOC: |
69 gm/liter minus water |
|
| Volume Solids: |
35.3% |
|
| Flash Point: |
N/A |
|
| Coverage: |
350-400 sq. ft. per gallon
1.5 dry mil ideal film thickness |
|
Theoretical
Coverage: |
378 sq. ft. @ 1.5 dry mils |
|
| Dry Time: |
One hour to touch @ 70°F and 50% relative humidity. Two hours to recoat @ 70°F and
50% relative humidity. |
|
| Application: |
Brush, roll or spray. Do not apply when
surface or air temperatures are below 35°F or when temperatures are
expected to drop below 35°F within 24 hours. |
|
|
|
8/08
|
|
An exterior full-bodied coating high in solids and rich in pure acrylic resin. Kril has excellent
adhesion, color retention and resistance to dirt pick-up. Kril flows easily and has reduced splatter resistance. Made
from the highest quality acrylic resin, Kril is a durable classic exterior paint. 100% acrylic resin, excellent adhesion,
washability and coverage make it ideal for new construction jobs, property maintenance, remodels & re-paints throughout
the Pacific Northwest climate.
|
100% fine quality acrylic resin
Titanium dioxide & extender pigments
Contains no lead or mercury
VOC compliant
|
Surfaces must be sound, dry and clean. Remove previous coatings that have poor adhesion.
Wash areas where mold and mildew are present. Remove all dirt, oil, grease, wax and/or other contaminant. Repair
cracks and fill voids. De-gloss shiny surfaces by lightly sanding. Clean and prime all metal surfaces with an
appropriate primer. Prime areas as needed. Test for adhesion and compatibility with existing finishes.
|
Never pour leftover coating down any sink or drain—use up material on the job or seal can and
store safely for future use. Do not incinerate closed containers. For specific disposal or recycle guidelines, contact
your local waste management agency or district. Always attempt to recycle whenever possible.
|
Limited Warranty: Miller Paint Company, Inc. warrants to the purchaser that this product
will provide satisfactory performance when applied according to label directions. If this product does not perform
to specifications, return unused portion along with sales receipt to place of purchase. As the sole remedy to purchaser,
dealer will, at its option: provide additional product to correct affected areas, replace with product of equal value or
refund the purchase price paid for this paint product. Failures caused by poor surface preparation, improper application
or a breakdown of the underlying surface or previous paint film are not covered by this warranty. THIS WARRANTY
SPECIFICALLY EXCLUDES LABOR OR COST OF LABOR OR INCIDENTAL OR CONSEQUENTIAL DAMAGES ASSOCIATED WITH THE USE OF THIS PRODUCT.
|
WARNING! If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC.
EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD
ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum
and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead
Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.
|
