ACRO PURE is a ZERO VOC
interior acrylic latex finish designed for application to the interior walls in residential, commercial, institutional and industrial
environments. Recommended for new or previously painted interior wallboard, plaster, masonry or previously painted or primed metal or wood
substrates.
|
|
|
| Color: |
White and Pastel Colors |
|
| Finish: |
Flat |
|
| Gloss: |
0-5% @ 60° |
|
|
| Density: |
12.16# per gallon |
|
| Clean-Up: |
Mild soap and water |
|
| VOC: |
ZERO gm/liter minus water |
|
| Volume Solids: |
38% |
|
|
| Flash Point: |
N/A |
|
| Coverage: |
400-425 sq. ft. per gallon
|
|
Theoretical
Coverage: |
407 sq. ft. @ 1.5 dry mils |
|
| Dry Time: |
One hour to touch @ 70°F and 50% relative humidity. Three hours to recoat @
70°F and 50% relative humidity. |
|
| Application: |
Brush, roll or spray. Spraying and backrolling recommended on new flat
work. Do not apply at temperatures below 45°F. Keep product from freezing. |
|
ACRO PURE is a low odor, ZERO
VOC, environmentally responsible interior acrylic latex flat
finish. ACRO PURE is formulated to produce excellent application
properties and durability and complies with GS-11 Performance Standards. ACRO PURE is enhanced with antimicrobial protection to inhibit the growth of odor
causing mold and mildew bacteria on the dried paint surface. The Super White formulation is enhanced with more
titanium dioxide and resin to provide maximum coverage and excellent hide.
|
|
Quality acrylic resin
Titanium dioxide
Extender pigments
Antimicrobial protection
|
Surfaces must be sound, dry and clean. Remove previous coatings that have poor adhesion.
Wash areas where mold and mildew are present. Remove all dirt, oil, grease, wax and/or other contaminant. Repair
cracks and fill voids. De-gloss shiny surfaces by lightly sanding. Clean and prime all metal surfaces with an
appropriate primer. Prime areas as needed. Test for adhesion and compatibility with existing finishes.
|
Never pour leftover coating down any sink or drain—use up material on the job or seal can and
store safely for future use. Do not incinerate closed containers. For specific disposal or recycle guidelines, contact
your local waste management agency or district. Always attempt to recycle whenever possible.
|
Limited Warranty: Miller Paint Company, Inc. warrants to the purchaser that this product
will provide satisfactory performance when applied according to label directions. If this product does not perform
to specifications, return unused portion along with sales receipt to place of purchase. As the sole remedy to purchaser,
dealer will, at its option: provide additional product to correct affected areas, replace with product of equal value or
refund the purchase price paid for this paint product. Failures caused by poor surface preparation, improper application
or a breakdown of the underlying surface or previous paint film are not covered by this warranty. THIS WARRANTY
SPECIFICALLY EXCLUDES LABOR OR COST OF LABOR OR INCIDENTAL OR CONSEQUENTIAL DAMAGES ASSOCIATED WITH THE USE OF THIS PRODUCT.
|
WARNING! If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC.
EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD
ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum
and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead
Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.
|
