Super Color

Miller Paint’s Super Color line combines superior performance with the convenience of high-hiding power. Designed to provide exceptional hide and easy application in brighter and lighter colors, Super Colors are available in red, yellow, and white bases. 100% acrylic and suitable for interior and exterior use. Super Color finishes include Eggshell, Satin and Semigloss for interior, and Velvet, Satin and Semigloss for exterior.

  • Superior Hide
  • Easy Application
  • Interior & Exterior
  • 100% Acrylic
  • Available in Velvet, Satin, and Semigloss Sheens

For pricing and availability, please contact one of over 50 Miller Paint stores throughout Oregon, Washington and Idaho. Also available at many authorized dealers.

SHEENS

INTERIOR WHITE EGGSHELL

Ideal for projects where a deep, rich look is desired yet only a minimal sheen is needed. Also applicable for commercial or residential projects that require minimal washability such as conference rooms, living rooms, or bedrooms.

TDS | SDS

INTERIOR WHITE SEMIGLOSS

This high-sheen product is very washable and perfect for areas that are more susceptible to dirt, grease and moisture. Use in applications like exterior smooth siding, exterior smooth wood trim, and primed metal surfaces.

TDS | SDS

RED VELVET

A flat finish will minimize visibility of surface imperfections due to light refraction. It is best used for rough surfaces, or surfaces that are regularly repainted or touched up.

TDS | SDS

RED SATIN

This finish will minimize dirt pick-up and is washable. Ideal for full-body exterior work where some sheen is desired. Best used when the surface is free of major imperfections.

TDS | SDS

RED SEMIGLOSS

This high-sheen product is very washable and perfect for areas that are more susceptible to dirt, grease and moisture. Use in applications like exterior smooth siding, exterior smooth wood trim, and primed metal surfaces.

TDS | SDS

YELLOW VELVET

A flat finish will minimize visibility of surface imperfections due to light refraction. It is best used for rough surfaces, or surfaces that are regularly repainted or touched up.

TDS | SDS

YELLOW SATIN

This finish will minimize dirt pick-up and is washable. Ideal for full-body exterior work where some sheen is desired. Best used when the surface is free of major imperfections.

TDS | SDS

YELLOW SEMIGLOSS

This high-sheen product is very washable and perfect for areas that are more susceptible to dirt, grease and moisture. Use in applications like exterior smooth siding, exterior smooth wood trim, and primed metal surfaces.

TDS | SDS

  • icons_0003_Vector-Smart-Object

    Coverage

    Approximately 300 to 400 square feet per gallon. Two coats recommended. Coverage depends on porosity and profile of surface and can be less when making a significant change in color.

  • icons_0002_Vector-Smart-Object

    Drying Time

    1 hour to touch, and 4 hours for recoat at 70°F and 50% relative humidity.

  • icons_0001_Vector-Smart-Object

    Disposal

    Never pour leftover material down any sink or drain. Use up material on the job, or seal can and store safely for future use. Do not incinerate closed containers. For specific disposal guidelines contact your local waste management agency or visit millerpaint.com/paint-recycling. Please re-use or recycle.

SURFACE PREP

  • icons_0009_Vector-Smart-Object

    REPAIR cracks and fill voids with a paintable patching/caulking material. Degloss all shiny, smooth, hard, or glossy surfaces by lightly sanding. Remove all loose and scaling paint.

  • icons_0008_Vector-Smart-Object

    CLEAN all paintable surfaces to be free of dirt, dust, oil, grease, wax, and other contaminants. Rinse and allow surface to dry completely.

  • icons_0007_Vector-Smart-Object

    PRIME unsealed surfaces such as ferrous metal, plaster/wallboard, cedar, redwood, and other wood surfaces that may contain tannins or water stains with an appropriate Miller Paint primer. Test for adhesion and compatibility when painting over existing finishes.

  • icons_0006_Vector-Smart-Object

    STIR thoroughly before use. Thinning not recommended. If necessary, use a small amount of clean tap water. Do not use solvent to thin.

  • icons_0005_Vector-Smart-Object

    APPLY using nylon or synthetic brush, pad, roller, or spray. Do not apply when surface temperatures are below 35°F or when temperatures are expected to drop below 35°F within 24 hours. Keep product from freezing.

  • icons_0004_Vector-Smart-Object

    CLEANUP by removing all paint spatters, and wash all brushes and equipment immediatley with warm soapy water. Follow with a clear rinse.

The contents of this can should be well stirred or boxed by pouring from one can to another to assure color uniformity. More than one can of the same color should be mixed together as you progress with your work. Check color before painting, not responsible for application of wrong shade. Custom colors are not returnable.

Your satisfaction with Miller Paint products is guaranteed. Learn more at millerpaint.com/promise.