Acrimax Exterior

AcriMax™ is a multi-surface, interior/exterior waterborne acrylic coating. Suitable for commercial and light industrial applications, it has excellent adhesion to a variety of substrates including properly prepared metal and masonry. AcriMax™ is quick drying and has early block resistance and hardness for projects where down-time needs to be kept to a minimum. From doors and windows to hand rails, cabinets and floors, AcriMax™ is a truly versatile product.

  • Self-priming directly to multiple surfaces
  • Excellent early block resistance and hardness
  • Dries quickly
  • Excellent adhesion to slick and glossy surfaces
  • Water clean-up

For pricing and availability, please contact one of over 50 Miller Paint stores throughout Oregon, Washington and Idaho. Also available at many authorized dealers.



Ideal for projects where a deep, rich look is desired yet only a minimal sheen is needed. It is designed for areas that require minimal washability and have limited use.




This finish will minimize dirt pick-up and is washable. With the hard finish of an enamel, a satin finish can also be used on interior walls where a strong, durable moisture resistant surface is needed. Best used when the surface is free of major imperfections. Use in applications such as interior primed smooth or rough walls, exterior or interior finish grade wood trim, or primed metal surfaces.




This high-sheen product is very washable and perfect for areas that are more susceptible to dirt, grease, and moisture. Ideal for projects in high traffic areas.



  • icons_0003_Vector-Smart-Object


    Approximately 350 square feet per gallon.

  • icons_0002_Vector-Smart-Object

    Drying Time

    1 hour to touch, and 4 hours for recoat at 70°F and 50% relative humidity.

  • icons_0001_Vector-Smart-Object


    Never pour leftover material down any sink or drain. Use up material on the job, or seal can and store safely for future use. Do not incinerate closed containers. For specific disposal guidelines contact your local waste management agency or visit Please re-use or recycle.


  • icons_0009_Vector-Smart-Object

    REPAIR cracks and fill voids with a paintable patching/caulking material. Degloss all shiny, smooth, hard, or glossy surfaces by lightly sanding. Remove all loose and scaling paint.

  • icons_0008_Vector-Smart-Object

    CLEAN all paintable surfaces to be free of dirt, dust, oil, grease, wax, and other contaminants. Rinse and allow surface to dry completely.

  • icons_0007_Vector-Smart-Object

    PRIME unsealed surfaces such as ferrous metal, plaster/wallboard, cedar, redwood, and other wood surfaces that may contain tannins or water stains with an appropriate Miller Paint primer. Test for adhesion and compatibility when painting over existing finishes.

  • icons_0006_Vector-Smart-Object

    STIR thoroughly before use. Thinning not recommended. If necessary, use a small amount of clean tap water. Do not use solvent to thin.

  • icons_0005_Vector-Smart-Object

    APPLY using nylon or synthetic brush, pad, roller, or spray. Do not apply when surface temperatures are below 50°F or when temperatures are expected to drop below 50°F within 24 hours. Keep product from freezing.

  • icons_0004_Vector-Smart-Object

    CLEANUP by removing all paint spatters, and wash all brushes and equipment immediately with warm soapy water. Follow with a clear rinse.

Specifications for Acrimax

Volume Solids 39 +/- 2% 39 +/- 2% 39 +/- 2%
VISCOSITY 95-100 KU 95-100 KU 95-100 KU
Weight Per Gallon 10.6(LB) 10.6 (LB) 10.6 (LB)
Gloss 20-25%@85° 55-65%@60° 55-65%@60°
VOC* (minus water) <150 g/L <150 g/L <150 g/L